Requirements for Pool & Spa Plans

Requirements for Pool & Spa Plans

Requirements for Pool & Spa Plans

  • Provide one set of plans (pools: ¼” per foot; spas 1” per foot) containing:
     
    Pool & Spa Plan (plan view, longitudinal & transverse section)

    • lane lines
    • shell construction
    • depths and dimensions
    • steps & benches
    • rope anchors
    • coping
    • line at 4 ½ ‘ depth
    • depth markers
    • underwater lights
    • no diving symbol
    • finish & color
    • handrails & ladders
    • step & bench lines
    • step holes & grab rails
    • volume and required flow calculations


    Plumbing Plan

    • inlets
    • pipe layout & sizes
    • hydrostatic relief valve
    • grates
    • skimmers & equalizers
    • auto-fill


    Equipment Room Plan

    • sump
    • time clock
    • hose bib & vacuum breaker
    • water supply protection
    • filter wash area
    • valves
    • floor material
    • ventilation
    • floor slope & drain
    • feeder/controller
    • GFCI
    • walls & roof
    • equipment & pipe layout
    • equipment model numbers
    • light


    Site Plan

    • Pools/Spas
    • fences & gates
    • recreation rooms and areas
    • restrooms
    • showers
    • drinking fountain
    • deck slope and drainage
    • deck lighting
    • signs
    • landscaping
    • emergency spa shutoff
    • deck size and material
    • hose bib
    • handicap lift sleeve
    • building doors & windows around deck
    • occupancy calculations


    Vicinity Map     (showing nearest cross streets)

    Property Plan

    Manufacturer’s Specification Sheets (provide one set)

    • pump
    • skimmer
    • hydrostatic relief valve
    • pressure & vacuum gauges
    • filter
    • handrails
    • disinfectant feeder
    • ladders
    • GFCI
    • flowmeter
    • drain grates showing open area
    • step holes & grab rails

    •  

  • Plans must show all details relevant to your project mentioned in the CALIFORNIA POOL CODE. Go to www.ccdeh.com to purchase a copy.

    •  

  • Please contact our Department for the appropriate Plan Review Fee and submit it with the plans. Initial plan review may take up to 20 working days. Three revised copies must be provided for approval. After approval, take two stamped plans to local Building Department for their Plan Review & Building Permits.

    •  

  • Call the Plan Reviewer from this Department who approved your plans 48 hours in advance for:
    • Pre-Gunite Inspection
    • Pre-Plaster Inspection
    • Final Inspection (before allowing use)

 
07/2/2021 – Plan Check Group